Round blade, that is, round blade. It forms a circular shape on the outside, and generally round blades are used in mechanical equipment, mainly for cutting, trimming and other processing functions. Round blades usually have a middle hole, the purpose is to make it fixed on the mechanical equipment, so as to achieve the cutting function. Among them, many round blades have tooth-shaped (flat teeth, pointed teeth, irregular teeth), and there are three types of blades: double-sided, single-sided, and non-edged. The general selection of round blades is as follows: Cr12mov, w6mo5cr4v2, w18cr4vSKH, M2, Germany 1.3343, Germany 1.2888, etc. As far as the tape used in the information industry is concerned, the vivid reproduction of sound and images is an absolute condition. In the manufacturing process, the accuracy of the slitting knife and the tool holder determines the accuracy of the tape cut. It can be said that it determines whether it can reproduce the sound and image full of realism. Slitting blade: The upper and lower slitting blades are widely used in papermaking, paper product processing, adhesive tape products, film, wire and cable, rubber, aluminum foil, chemical fiber, non-manufacturing cloth, composite packaging materials, telecommunications appliances, cigarettes, leather, printing , Food and clothing industries.
All in all, a round blade is a round blade, which is mainly used for the slitting of cakes, paper, film, gold, silver foil, aluminum foil, copper foil and other items. The blade is required to have the least cutting resistance and the greatest abrasion resistance.
Circular knife refers to the arc-shaped cutting edge, which is mostly used for round and round dents. It is also very useful for carving traditional flowers. For example, the round surface of flower leaves, petals and flower branches needs to be round. Knife conformal treatment. The horizontal movement of the circular knife is relatively labor-saving, and it can adapt to large ups and downs and small changes. And the line of the round knife is not sure, it is flexible to use and easy to explore. According to different purposes, the model of the round knife should be different, and the size range is basically between 5 cm and 0.5 cm. The two corners of the knife edge for the round carving figure should be polished off, and the shape is arc, otherwise when the carving pattern or other dents, not only can not be pushed, but also the sides of the dent road will be damaged. If you are doing embossing, you should keep the two corners of the knife edge, and use the function of the corners to carve the corners of the ground, so two kinds of them should be equipped. The slitting round blade is mainly used for slitting paper, film, gold, silver foil, aluminum foil, copper foil, magnetic tape and other items. The blade is required to have the least cutting resistance and the greatest abrasion resistance. Due to the requirement of product accuracy, the cutting edge must reach micron-level accuracy. Material selection: Cr12mov, w6mo5cr4v2, w18cr4v, SKH, M2, Germany 1.3343, Germany 1.2888, etc.
